Top 10 Best carbon dioxide in 2026

Main highlights

• •Electrochemical sensor technology detects CO gas
• •Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included); Install on a wall of your home or place on a tabletop
• •Green LED indicates power to the carbon monoxide detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide
• •Event Memory records the last time carbon monoxide was detected or when the unit was last tested

Main highlights

• •Keep your family safe with this easy to use, battery operated carbon monoxide alarm; Battery powered alarms provide continuous monitoring of CO levels, even if there's a power failure
• •Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room.The alarm sequence should last 5-6 seconds. If it does not alarm, make sure fresh batteries are correctly installed, and test it again. If the unit still does not alarm, replace it immediately
• •A loud 85 decibel alarm sounds when CO levels reach dangerous , Battery Replaceable - Yes
• •To ensure complete protection make sure to place one on each level of your home and in each bedroom
• •5-year limited warranty; Equipped with end of life signal chirp, so you know when it’s time to replace the unit for safety
• •All first alert CO alarms are rigorously tested to meet UL standards
• •First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

Main highlights

• •Please Note: SC07 is a basic standalone unit; it does not support wireless interconnection, does not have Wi-Fi, and cannot be used with a base station; for interconnection, search for SC07-W. For Wi-Fi functionality, look for SC07-WX or SC07-MR
• •2-in-1 Protection: The combination smoke and CO detector detects both smoke and carbon monoxide faster and more accurately using a photoelectric smoke sensor and an electrochemical CO sensor
• •10-Year Battery: The fire and CO alarm is built with a sealed lithium battery that provides 10 years of continuous power, saving you from changing batteries and power outage
• •Combination Alarm with CO Readings: When the alarm is triggered, the LCD will display the CO concentration and illuminate. In standby mode, the LCD turns off to ensure you are not disturbed
• •Simple Installation: Requires no rewiring; easy to mount this smoke and carbon monoxide alarm on any wall or ceiling with the included mounting bracket, screws, and anchor plugs
• •Informative LCD: Displays real-time CO levels from 30–999 ppm (parts per million) taken from the surrounding air, as well as battery level and working status

Main highlights

• •High Accuracy and Reliability:Shyeeh carbon monoxide detectors has a built-in advanced electrochemical sensor that detects dangerous CO levels more accurately and alarm more quickly.
• •Alarm Criteria:Safeguard your home with Shyeeh co detector specific alarm thresholds: 50ppm (alert within 60-90 mins), 100ppm (within 10-40 mins), and ≥300ppm (within 3 mins). In case of danger, the carbon-monoxide detectors gives an alarm of no less than 85dB to 215-430ft²(20-40m²) to alert you.
• •Bttery Pwered,Easy to Istall:You can mount carbon monoxide alarm on the wall or ceiling with screws (Include). Powered by 3 * 1.5V AA batteries (Not Included), no socket required, not affected by power outages, and can continuously monitor carbon monoxide levels to ensure your family's safety.
• •Real-time Data LCD display:The co monitor provides 24-hour real-time monitoring, making it easy to read the level of carbon monoxide in your surroundings and protect your family from an invisible threat.
• •Home Protection:According to data analysed in the United States, a home fire occurs every 38 seconds. The earlier the danger is recognised, the risk of death is reduced by 50%. The carbon monoxide detectors monitor will protect your home from the dangers of CO and eliminate the need to pay high detection fees for suspected carbon monoxide leaks.

Main highlights

• •5-in-1 Detectors - Real-time monitoring of carbon monoxide(PPM), combustible gas (%LEL), temperature(°F), humidity(RH%) and Backup Battery.
• •Easy Installation - Plug and play. Need to remove the screen protector.
• •9V battery backup provides protection during a power outage.
• •An alarm of 85 decibels (adjustable) will sound.
• •We provide unconditional return and exchange within 1 year.

Main highlights

• •CARBON DIOXIDE DETECTOR for HOME, SWITCH °C/°F – Great item for any home to monitor the weather and air quality! Real-time CO2 value, temperature and humidity, CO2 history chart, CO2 Concentration range, 3 Adjustable Volume for Alarm Setting & 3 Adjustable Backlight, Max/Min Data, Low battery indicator.
• •HIGH-PRECISION SENSIRION CO2 SENSOR – Equipped with Swiss-made Photoacoustic Sensor provides precise and reliable readings, which gives you peace of mind about the air in your home. CO2 detection range：400～5000PPM,accuracy：+/- 5% + 50PPM. Temperature range: 14.2°F ~ 122°F, Humidity range: 20% to 95 %.
• •IMPROVE VENTILATION – Very useful for high concentration of poor air quality and cooking indoors and it will indicate to open a window/door to refresh the area to get the levels lower. CO2 monitor for Home, RV, Grow Tents.
• •INDOOR AIR QUALITY MONITOR - Detect rise and decrease in carbon dioxide level, perfect for anyone wanting to monitor air quality! Elevated CO2 can cause symptoms like headaches, drowsiness, allergies and difficulty concentrating, to keep an eye on air quality at home or work!
• •USB POWERED OPTION & BATTERY BACKUP & ADJUSTABLE BACKLIGHT – It is plugged in which allow the multi brightness display to stay on all the time, if you prefer. Either set it on tabletops, or mount it on the wall. 3 x AAA Battery(not included) for Backup & outdoor manual calibration.
• •calibration process:Place the device in a standard calibration environment of 400PPM,Press and hold the ALERT button, and power on the device or install the battery,The device will sound "Bi-BI" and the screen will display the "CAL" character and keep blinking,After three minutes of calibration, the "PASS" character will be displayed. Power off and power on the device.

Main highlights

Main highlights

Main highlights