Top 10 Best crossover in 2026

Main highlights

• •Injection Molded Material
• •5/16" Bolt Terminal
• •Stainless Hardware
• •CUT OUT DIAMETER -
• •FLANGE DIAMETER -

Main highlights

• •Bass Restoration Processor, Included ACR-1 Remote Level Control & 20' RJ-14 Cable
• •Enhanced bass output: The device restores low-end frequencies and provides a more dynamic and immersive listening experience.
• •Built-in bass maximization circuit: The circuit allows you to adjust the frequency response and control the level of the bass output.
• •Remote bass level control: The remote control allows you to adjust the bass output from the comfort of your driver's seat.
• •Advanced processing technology: The device is designed with advanced signal processing algorithms and a variable bass boost control for customized bass response.
• •Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. The center frequency is continuously variable from 27 Hz to 63 Hz. The width of the band is also adjustable.
• •Subsonic Filter: The subsonic filter crossover point is 33 Hz; it's governed by a replaceable chip, so it can be changed to 20, 25, 30, 35, 40, or 45 Hz.
• •EPICENTER LINK: Seamlessly connect the EPICENTER bass restoration processor with an EPIC Monoblock or 5-channel amplifier for an unbeatable audio experience and 1A fuse protection to safeguard your equipment.

Main highlights

• •Sets audio system gain overlap, continuously variable from 0.0dB - 15.0dB in 0.1dB steps. Distortion Detection trigger level > 1.0% Harmonic Distortion.
• •Checks gain overlap of an audio system without making any adjustments to the existing settings. Guaranteed operating range of input signal is 1.2Vrms – 200Vrms. (40,000 Watts at 1ohm) Autoranging
• •Verifies that the gain overlap of an install hasn't been tampered with after install
• •Quasi-RMS voltmeter (can detect clipping at any frequency)

Main highlights

• •3/4" PVC Material.
• •1/2" Body, 1/4" Flange
• •All Stainless Steel Hardware (28 pieces)
• •5/16" Bolt Terminal

Main highlights

• •*COMES IN BLACK*
• •Aluminum/ Stainless hardware
• •5/16" studs
• •Heavy Duty
• •MADE IN THE USA

Main highlights

Main highlights

• •Injection Molded
• •High Temperature Base Plate
• •Aluminum Busbar & Landings
• •3/16" Clear Acrylic cover

Main highlights

• •Frequency: 10 - 20,000 Hz
• •AC Impedance: 0 - 200 Ohms
• •True Power Dyno: 0 - 15,000 Watts
• •DC Voltmeter:-100 Volts to +100 Volts AC Voltmeter: 0 - 150 VRMS AC Ammeter: 0 - 100 ARMS
• •Measure True Amplifier Power output into any load reactive or resistive

Main highlights